Hoşgeldiniz, Bugün 21 Mayıs 2012 Pazartesi
| DESCRIPTION | CAHD618 | CAHD818 | CAHD820 | |||||||
| General Capacity | Toble size (lxw) | 150×460mm | 200×460mm | 200×500mm | ||||||
| Max.grinding length | 475mm | 475mm | 600mm | |||||||
| Max.grinding width | 160mm | 210mm | 220mm | |||||||
| Distance from table surface to spindle center | 400mm | 400mm | 400mm | |||||||
| Standard mag.Ghuck size | 150×450mm | 200×450mm | 200×500mm | |||||||
| Longitudinal Movement | Manual travel | 485mm | 485mm | 600mm | ||||||
| Hydraulic traverse | 485mm | 485mm | 530mm | |||||||
| Hydraulic feed （table speed ）approx. | 1~25m/min | 1~25m/min | 1~25m/min | |||||||
| Cross Movemen | Manual travel | 180mm | 210mm | 230mm | ||||||
| Auto cross feed | 180mm | 210mm | 220mm | |||||||
| Hand feed per revolution | 0.02mm | 0.02mm | 0.02mm | |||||||
| Hand feed per graduation | 5m | 5m | 5m | |||||||
| Increment cross feed | 0.5-10mm/min | 0.5-10mm/min | 0.5-10mm/min | |||||||
| Continuous cross feed (approx.) | 1100mm/min | 1100mm/min | 1100mm/min | |||||||
| Verical Downfeed | Rapid traverse(approx.) | 230mm/min | 230mm/min | 230mm/min | ||||||
| Hand feed per graduation | 0.005mm | 0.005mm | 0.005mm | |||||||
| Hand feed per revolution | 1mm | 1mm | 1mm | |||||||
| Grinding Wheel | Wheel size (diaxwidthxbore) |
|
|
| ||||||
| Spindle speed (50/60HZ) | 3000/3600rpm | 3000/3600rpm | 3000/3600rpm | |||||||
| Motors | Spindle drive motor | 1.5HP | 1.5HP | 2HP | ||||||
| Hydraulic motor | 1HP/2HP(50HZ) | 1HP/2HP(50HZ) | 1HP/2HP(50HZ) | |||||||
| Cross feed motor | 25W(2A/3A) | 25W | 40W | |||||||
| Elevating motor | 40W | 40W | 60W | |||||||
| Weight | Net weight/gross weight (approx.) | 910/1040kgs | 1200/1380kgs | 1470/1620kgs | ||||||
| Packing Size | Length×width×height | 1560×1300×2200mm | 1700×1600×2200mm | 1780×1600×2200mm | ||||||
