Hoşgeldiniz, Bugün 21 Mayıs 2012 Pazartesi
| CY6150B | CY6250B | CY6163B | CY6263B | CY6166B | CY6266B | |
| Swing over bed | 500mm (20") | 630mm (25") | 660mm (26") | |||
| Swing over cross slide | 300mm (12") | 350mm (13.8") | 380mm (15") | |||
| Swing in gap | 710mm(28") | 800mm (31.5") | 830mm(32.7") | |||
| Length of gap | 240mm | |||||
| Length of workpiece (max.) | 750mm (30") | 1000mm (40") | 1500mm (60") | 2000mm (80") | 2500mm (100") | 3000mm (120") |
| Spindle nose to ISO 702/11 | D8 D11 | |||||
| Spindle thru-bore diameter | 82mm (3.22") | |||||
| Steps spindle speeds | 9~1600r/min | |||||
| Max.main cutting edge | 13700N(3080lbf) | |||||
| Longitudinal feeds | 0.028 ~ 6.43mm/rev (0.0011 - 0.25in/rev) | |||||
| Transversal feeds | 0.012 ~ 2.73mm/rev (0.0005 - 0.107in/rev) | |||||
| Steps Metric threads | 0.5 ~ 224mm | |||||
| Steps Inch threads | 72-1/8t/in | |||||
| Steps Module threads | 0.5- 112mm | |||||
| Steps Diametral pitch threads | 56 -1/4 DP | |||||
| Cross slide travel (max.) | 320mm (1 2.6") | 350mm (1 3.8 ") | ||||
| Top slide travel (max.) | 145mm (5.7") | 170mm (6.7 ") | ||||
| Longitudinal rapid travelling speed | 50Hz — 4.5m/min (15ft/min) | 60Hz — 5.4m/min (18ft/min) | ||||
| Transversal rapid travelling speed | 50Hz — 1.9m/min (6.2ft/min) | 60Hz~2.3m/min (7.5ft/min) | ||||
| Sleeve diameter | 75mm (2.95" ) | |||||
| Morse taper of sleeve bore | M5 | |||||
| Sleeve travel (max.) | 1 50mm (6 ") | |||||
| Main drive motor | 7.5KW (10HP).11KW (15HP).15KW (20HP) | |||||
| Rapid travel motor | 250W (0.335HP).1360r/min | |||||
| Coolant pump motor | 90W(0.12HP).25L/min (6.6 gal/min) | |||||
