Hoşgeldiniz, Bugün 21 Mayıs 2012 Pazartesi
| Max.slotting length | 200 | 320 | mm | |
| Number of ram reciprocation per minute | 32,50,80,125 | 20,32,50,80 | ||
| Inclination of ram | 0°-8° | 0°-8° | ||
| Vertical adjustment of ram | 200 | 315 | mm | |
| Diameter to table | 460 | 630 | mm | |
| Distance from tool holding surface to column front | 480 | 600 | mm | |
| Distance from table surface to | 320 | 490 | mm | |
| Max.longitudinal travel of table | 420 | 630 | mm | |
| Max.cross travel of table | 420 | 560 | mm | |
| Max. rotary angle of table | 360° | 360° | ||
| Range of longitudinal and cross | 0.054-1.24 | 0.08-1.21 | mm | |
| Range of rotary feeds of table | 0.035°-0.805° | 0.052°-0.783° | ||
| Max.load of table | 400 | 500 | kg | |
| Power of main motor | 3 | 3 | kw | |
| Power of motor for rapid traverse | 0.75 | 0.75 | kw | |
| Speed of main motor | 1420 | 960 | r/min | |
| Speed of motor for rapid traverse | 1380 | 1380 | r/min | |
| Overall dimensions(L x W x H) | 1717x1221 « 1885 | 2161x1496x2246 | mm | |
| Net weight(approx) | 2200 | 3100 | Kg | |
| Flatness of machined surface on tested workpiece | 0.015 | 0.015 | mm | |
| Verticaiity of machined surface on tested workpiece | 0.025 | 0.025 | mm | |
| Surface roughness on tested workpiece | 6.3/ •^ | 6.3/ •^ | ||
| Verticaiity of machined side surface on tested workpiece against base | 0.02 | 0.02 | mm | |
