Hoşgeldiniz, Bugün 21 Mayıs 2012 Pazartesi
Coolant through spindle housing assists spindle cooling while the 6 jet surround spray design
RIGID MEEHANITE CASTING...
stability / heavy loading / high accuracy
Heavy duty type linear guide ways use for 3 axes 3 sets linear guide ways designed on longitudinal & cross ways, five block used for each, eight block used for Z axis Additional cage for the balls of linear guide way ensured low noisy, maximum stability, permitted heavy duty loading of wrk piece,the service life is 65~85% better than the competitors Full sealed blocks, no grease to be added(By optional)
| Specifction | VMC-1100 |
| Table Size | 1120x510 |
| T-slot of table | 18x3x160 |
| Max. load capacity | 700 kgs |
| X trable | 1100 |
| Y trable) | 560 |
| Z trable | 560 |
| Spindle nose to top of table | 150~710 |
| Column surface to center of table | 345~905 |
| Spindle taper | BT40 |
| Spindle speed | 8000 |
| Transmission of spindle & motor | Belt ( ZF gear box) |
| Spindle center to column front surface | 625 |
| Rapide feed rate of X,Y,Z | 30 m/min |
| Cutting feed rate | 10 m/min |
| Spindle motor | 7.5/11 Kw |
| Feed motors | F:1.8 kw W:1.5 kw |
| No. of tools | Genoa type 16 tool ATC |
| Max. tool diameter | 104 |
| Max. tool length | 250 |
| Max. tool weight | 6kgs |
| Coolant pump | 0.75 kw |
| Lubrication | 150 w |
| Air source | 6 kg/cm2 |
| Power requirement (KVA) | 20 KVA |
| Machine dimension (LxWxH) | 3100x2200x2500 |
| Machine weight | 5500 kgs |
| CNC control system | MITSUBISHI/FANUC |
